Thingiverse
Mini-ITX PC case
von StePD
403
Downloads
549
Likes
1
Makes
Hi! This is a mini-itx case that fits - a mini-itx motherboard with a flex atx power supply. Modeling this body, I was inspired by the design mac pro 2013
Printed Petg plastic. Then post-processing - grinding with sandpaper of different gradations: p80-p120-p220-p320. Then putty was needed in some problem areas. Then primer and paint. The result is a smooth surface, devoid of the disadvantages of 3D printing.
The lower fan must be put on the blower. Fan 140 mm, with mounts for 120 mm
To assemble the case you will need:
Countersunk screws m3 - L10x20pcs
Countersunk screws m4 - L30x4pcs
Printed Petg plastic. Then post-processing - grinding with sandpaper of different gradations: p80-p120-p220-p320. Then putty was needed in some problem areas. Then primer and paint. The result is a smooth surface, devoid of the disadvantages of 3D printing.
The lower fan must be put on the blower. Fan 140 mm, with mounts for 120 mm
To assemble the case you will need:
Countersunk screws m3 - L10x20pcs
Countersunk screws m4 - L30x4pcs
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
