Thingiverse
Mini-Small-Squares
por rickswirebox
0
Descargas
0
Likes
0
Makes
These are the neatest, most useful, and helpful little squares that do the job. Just 1, 2, and 3 inch. Holes on ends for hanging, so you may find them later.
You will need a old, worn out broke 1/2 inch bandsaw or hacksaw blade. Just use a vise or vise-grip pliers and brake off 1, 2,or 3 inches of it. Grab a file or run to the old bench grinder and grind the ends and teeth(off) square as you can. Watch your hands, those small pieces will rip your hand wide open. Now slide those pieces into the end with the slot and use a square, a big one need be to get them a perfect square. Then, drop a small amount of super-glue in the holes to freeze the blades in place.
That easy. Now you have 3 near-free, nice, small mini squares. For us makers and builders, see how often you go trying to find those little jewels. :)
Will upload some photos later.
Happy 3D Printing, Thanks, Rick.
You will need a old, worn out broke 1/2 inch bandsaw or hacksaw blade. Just use a vise or vise-grip pliers and brake off 1, 2,or 3 inches of it. Grab a file or run to the old bench grinder and grind the ends and teeth(off) square as you can. Watch your hands, those small pieces will rip your hand wide open. Now slide those pieces into the end with the slot and use a square, a big one need be to get them a perfect square. Then, drop a small amount of super-glue in the holes to freeze the blades in place.
That easy. Now you have 3 near-free, nice, small mini squares. For us makers and builders, see how often you go trying to find those little jewels. :)
Will upload some photos later.
Happy 3D Printing, Thanks, Rick.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!