Miniature Hex Base

Same sizes as a popular giant stomping mech game.

READ THIS BEFORE PRINTING:
====================
There's a trick to printing these quickly (in Cura at least) with the following steps:
1. Flip the model upside down.
2. Set "Shell" / "Top Layers" to 0. This is very important.
3. Set "Shell" / "Bottom Layers" so a value so that the final thickness will be around 0.8mm - my layer height is 0.08 and I set this value to 10 so that the total thickness is 0.8mm.
4. Set "Infill" / "Infill Density" to 0.
5. For a 0.4mm nozzle, set the "Shell" / "Wall Line Count" to around 3, maybe 4. Use more with smaller nozzles. I use a 0.25mm nozzle and my wall line count is set to 5 which may be a bit thin.
6. Disabled "Shell" / "Enable Ironing" if you have it on.

I'd advice creating a new profile and saving it so you don't mess up your existing one.

This should give you a hollow hex base with no bottom on it that looks a lot like the "real thing". You can print them quick and they don't