Minimalistic hook

Material: PETGInfill: 50%, Grid pattern (stable and distributes load evenly)Wall Thickness / Perimeters: 4–5 walls (1.6–2.0 mm)Top Layers: 6Bottom Layers: 5Holes: Perimeters only + at least 4 perimeters so there’s solid material around the screw holeLayer Height: 0.2 mm for good strength and detailPrint Temperature: 240–250 °C (depending on PETG brand)Bed Temperature: 80 °CCooling: 40–50% fan speed (higher = more detail, lower = better layer adhesion)Brim: 3–5 mm if the part is small to prevent warping