Slicer Discord
MiniPlan v5.0 – 3D-Druckmodell von Thingiverse Thingiverse
MiniPlan v5.0 – Bild 1 MiniPlan v5.0 – Bild 2 MiniPlan v5.0 – Bild 3 MiniPlan v5.0 – Bild 4 MiniPlan v5.0 – Bild 5 MiniPlan v5.0 – Bild 6

MiniPlan v5.0

1.7k Downloads
1.6k Likes
3 Makes
Zum Modell
Update NOTE!! I've made MiniPlan V6 - Mason : https://www.thingiverse.com/thing:2138930

MiniPlan - Robot Fun: https://www.facebook.com/miniPlanrobot/

GitHub Code & SCH : https://github.com/GeorgeChiou/MiniPlan-V5

____________________________________________________________________
The MiniPlan v5.0 is more smaller and more cheap !
https://www.facebook.com/miniPlanrobot/

Control Board : TOROBOT USC-20 & Bluetooth UATR to TTL
http://tw.taobao.com/item/45065229005.htm
http://tw.taobao.com/item/10194716671.htm

Servo : Emax ES08DE or Emax ES08MD x 16 PCS ( +1 for Head )
http://www.amazon.com/Emax-ES08DE-Digital-Helicopters-Airplanes/dp/B00C85NPF2

Power Board : LM2596 DC-DC Buck Converter Step Down Module
Battery : DUALSKY 7.4V , 400mAh
Screws : M2 x 5mm , M2 x 8mm , M3 x 6mm
Bearing : 4x7x2.5 MR74ZZ


This had always been a dream since I was little,
it's the 3D printers that allowed my dream to come true。
There are 16 servo motors tha
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, Polycarbonate
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen