Thingiverse
Mirror Cube
von BadBobbyBrown
1
Downloads
1
Likes
0
Makes
This is a 3D-printable Mirror Cube. It's a shapeshifting variant of the Rubik's Cube where all pieces are the same color but different sizes, making the challenge all about shape instead of color.
Hardware
-m3 screws roughly 16-18mm in length x5
-m3 screw roughly 12-14mm in length x1
-springs roughly 5mm in diameter and 6mm in length x5
-springs roughly 5mm in diameter and 3.5mm in length x1
This is just what I had that worked but I'm sure there is better hardware to use.
Dimensions
57x57x57mm
If you have any questions or comments, please feel free to leave a comment. I'd be happy to help!
Hardware
-m3 screws roughly 16-18mm in length x5
-m3 screw roughly 12-14mm in length x1
-springs roughly 5mm in diameter and 6mm in length x5
-springs roughly 5mm in diameter and 3.5mm in length x1
This is just what I had that worked but I'm sure there is better hardware to use.
Dimensions
57x57x57mm
If you have any questions or comments, please feel free to leave a comment. I'd be happy to help!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
