Thingiverse
Mirror_light
von ktpKra5h
2
Downloads
1
Likes
0
Makes
This is my first project. I have created this lamp for my mirrow.
I have printed this 4 parts (2x'Fassung', 'Mittelteil' and 'Halterung') and screwed it together in this order:
1. Screw 'Halterung' to 'Mittelteil' with four M4 screws (I don't needed to use some nuts because of it goes strong enough into the plastic)
2. fix the lamp sockets to the 'Fassung'
3. screw in the 'Fassung' into the 'Mittelteil' an by carefully that the seam is at the back site of the final lamp (the first try could be a little bit strong)
4. wire it correctly (please ask a electrician for that)
5. use ONLY LED LAMPS WHICH DO NOT PRODUCE HEAT
I have printed this 4 parts (2x'Fassung', 'Mittelteil' and 'Halterung') and screwed it together in this order:
1. Screw 'Halterung' to 'Mittelteil' with four M4 screws (I don't needed to use some nuts because of it goes strong enough into the plastic)
2. fix the lamp sockets to the 'Fassung'
3. screw in the 'Fassung' into the 'Mittelteil' an by carefully that the seam is at the back site of the final lamp (the first try could be a little bit strong)
4. wire it correctly (please ask a electrician for that)
5. use ONLY LED LAMPS WHICH DO NOT PRODUCE HEAT
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!