Thingiverse
Mirror - motor mount
29
Downloads
32
Likes
0
Makes
This is a mirror/motor module for a laser Spirograph system.
The mirror is set to a 3 Degree angle.
To attach the mirror to the disc use a small peace of double sided tape.
The motor is attached to the motor_mount using double sided tape and a cable tie. This will help to limit the noise generated from the motor.
The motor used in the picture above, is from a computer CD drive. Most cd players will have this small motor in it.
Update:
* Changed mirror_mount from a 6 to a 3 degree angle and shortened the shaft to 10 mm in length
The mirror is set to a 3 Degree angle.
To attach the mirror to the disc use a small peace of double sided tape.
The motor is attached to the motor_mount using double sided tape and a cable tie. This will help to limit the noise generated from the motor.
The motor used in the picture above, is from a computer CD drive. Most cd players will have this small motor in it.
Update:
* Changed mirror_mount from a 6 to a 3 degree angle and shortened the shaft to 10 mm in length
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
