Moana

Please rate if you print, it really helps me, thank you Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x183.7mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA Kexcelled Sky Blue Transmission Distance: 2.6 PLA Default White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue At layer #22 (1.84mm) swap to Sky Blue At layer #26 (2.16mm) swap to White for the rest. Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot. Thank you and enjoy the print