Thingiverse
Model Rocket
door jronfr
60
Downloads
30
Likes
0
Makes
https://youtu.be/Q5707JlOWHc
Model rocket. Will fit C and D sized rocket motors. Made this rocket from a college CAD course. I have printed 4 of these rockets and they work like a charm. Overall height is around 340mm.
Inspired by: printedrockets.com (See site for additional instructions)
Other required parts:
Shock Cord (Rubber band that connects the Cone to the Body)
Parachute
Flame retardant paper (to protect parachute from melting)
Rocket motor (D12-0 or D12-3 seem to work the best) C size motors also fit
15 - 20 Grams of molding clay must be molded into the inside tip of the nosecone for stability
Have fun!
Model rocket. Will fit C and D sized rocket motors. Made this rocket from a college CAD course. I have printed 4 of these rockets and they work like a charm. Overall height is around 340mm.
Inspired by: printedrockets.com (See site for additional instructions)
Other required parts:
Shock Cord (Rubber band that connects the Cone to the Body)
Parachute
Flame retardant paper (to protect parachute from melting)
Rocket motor (D12-0 or D12-3 seem to work the best) C size motors also fit
15 - 20 Grams of molding clay must be molded into the inside tip of the nosecone for stability
Have fun!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
