Modular Device Stand (MDS)

This is the Modular Device Stand.Provides storage and organisation for small digital and other devices, such as power banks, spare phones, battery charges, wallets, small notebooks etc.Modular - add or remove sections as desired! Sections range from 13mm (for slim devices like smartphones) to 30mm width (for thicker devices like a 20000 mah powerbank).Customisable panels, which can be printed solid, or using infill settings in the slicer. Plate 1 - ConnectorsChoose your connectors based on how many sections you want the MDS to have, and the size you want each section to be.Connectors are provided for section sizes from 13mm to 30mm. (The width of a connector is 4mm less than the size of the section, and this is not a mistake :) For instance, a connector for a 13mm section is 9mm wide, and a connector for a 30mm section is 26mm wide.) Plate 2 - Panel BaseYou will need: 2 panel base (end) pieces(X-1) panel base (middle) pieces, where X is the number of sections you want. For e.g.: if you