Modular Diecast Wall Rack

A modular wall rack designed so you can layout your collection how you wish. Rack is designed to be expandable and handle diecast in packaging and out of packaging. See assembly guide for full instructions Non-3D Printed Items Needed:2+ screws that fit through the holes of the print2+ washers that fit in the holes of the print and the screws fit through2+ anchors for the screws Tools:Appropriate sized drill bit for the wall anchorsDrill for the drill bitScrewdriver for the screwsSmall levelPencil 3D Prints: Plate 1: Plate Corner.stl; Can be used for each corner of the overall rackPlate 2: Plate Side.stl; Can be used for each side/edge of the overall rackPlate 3: Plate Center.stl; Can be used for the entire rack if you don't want to print the corner/side plates or can be used just for the interior sections of the rack.Plate 4: Pin.stl; Holdes plates together. You need 2 for where each plate connects to anotherPlate 5: Peg.stl; These are used to hang diecast in packaging or trays up.