Thingiverse
Modular Face Shield
von ODG3dPrinting
2
Downloads
5
Likes
0
Makes
The complete model takes 2 prints of the full field stl for a total of 30 blocks and 1 print of the 3 pegs stl file. i have been printing at .2 with zero supports. the files are set for a 6inx6in build plate (150mmx150mm)
uses standard US 3 hole punch with overhead projector transparencies for the shielding. any plastic that can be 3hole punched and is clear should work, like a carefully cut 2-3 liter bottle for example where transparencies cant be found.
10 blocks for the front, 10 blocks for the back connected by T blocks.
attach Quad blocks to the T blocks
Face shield is, long piece, peg peice, 2 blocks, center peg, 2 blocks, peg peice, long peice.
attach that to the Quads above the front band
last 7 blocks go across the top. there should be 2 spare blocks for customization or failsafe incase of part failure.
uses standard US 3 hole punch with overhead projector transparencies for the shielding. any plastic that can be 3hole punched and is clear should work, like a carefully cut 2-3 liter bottle for example where transparencies cant be found.
10 blocks for the front, 10 blocks for the back connected by T blocks.
attach Quad blocks to the T blocks
Face shield is, long piece, peg peice, 2 blocks, center peg, 2 blocks, peg peice, long peice.
attach that to the Quads above the front band
last 7 blocks go across the top. there should be 2 spare blocks for customization or failsafe incase of part failure.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
