Modular Hexagon Storage

A compact and visually satisfying modular hexagon storage system designed for organizing small items like screws, electronic components, connectors, and workshop essentials. This design consists of two primary parts: Hexagon container blocks that seamlessly connect and stack together Smooth sliding drawers that fit perfectly inside each module The modular geometry allows you to expand your storage system infinitely—just print more units and snap them together. You can also mix in larger drawer variants for a customized storage layout. Perfect for: Electronics workbench 3D printing tools & parts DIY hardware organization Desk storage with a modern aesthetic 🛠️ Printing Instructions 🔹 Container (Hexagon Frame) Print with the flat hexagon back side facing the build plate No supports required Prints cleanly in a single piece Can use higher layer height for faster printing 🔹 Drawers Print upright (opening facing forward/up) No supports needed Use finer layer height for smoother sliding fit ⚙️ Recommended Print Settings 🧱 General Settings Material: PLA / PETG Nozzle: 0.4 mm Wall Count: 2–3 walls Top/Bottom Layers: 3–4 Infill: 10–20% (Grid / Gyroid) 📐 Container Settings Layer Height: 0.2 – 0.28 mm Supports: ❌ Not required Adhesion: Optional (Brim if needed) 📏 Drawer Settings Layer Height: 0.12 – 0.16 mm (recommended ~0.15 mm) Supports: ❌ Not required Print Speed: Slightly slower for better finish Cooling: On (for cleaner edges)