Modular Plastic CNC

Important information: on this page you will not find assembly instructions for one CNC machine.
On the contrary, here you will only find components to build your own type of a CNC machine. For this reason it is clear that there are no size specifications for the tubes and wooden panels. It depends on what you want to build.
In the attached pictures you can see examples of 5 different types of CNC machines that you can build with these printed parts. I'm sure if you look at all the available parts you'll come up with more possibilities.

I developed this parts for
- T8 threaded spindles
- Nema 17 stepper motors
- M4 screws (length 16, 20, 30 and 45mm) and nut size
- small 4x13x5mm 624ZZ as bearings
- pipes with a radius of 12.5 mm
- and a hand full 608 bearings

Another note about the pictures: all the transparent parts are made of wood. For more information, visit my site at https://modplacnc.eu

A tip from my side: I recommend filling all the nut traps in all the part