Thingiverse
Modular RC pitmat
par tuxstang
3
Téléchargements
1
Likes
0
Makes
A simple, modular, RC pitmat.
Needed something to build or maintain my rc without running after screws on the table, but easier to store than usual pitmats.
Each module is 200x200 to suit most printers.
Usual setup provides a surface of 546x300x2 with 4 corners, 2 centers and 10 connectors, or 346x300 with only 4 corners and 4 connectors.
09/09
Added a 100mm depth section to enlarge the working surface in a 6x6 pattern if needed.
Needed something to build or maintain my rc without running after screws on the table, but easier to store than usual pitmats.
Each module is 200x200 to suit most printers.
Usual setup provides a surface of 546x300x2 with 4 corners, 2 centers and 10 connectors, or 346x300 with only 4 corners and 4 connectors.
09/09
Added a 100mm depth section to enlarge the working surface in a 6x6 pattern if needed.
tuxstang publie également sur
73 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !