Modular Remote Electronics Enclosure

I made this quick light weight enclosure for my electronics after moving the components off my A8 frame (vibrations + solder joints = failures). One thing I did not want to do was make an enclosure that was specific ONLY to my setup, or only to ONE setup. Thus I made this modular design. The blank mount card can be configured anyway you need. Just add the mount bosses for your boards and make cut-aways to reduce material used.

The cards included are:
1 card for the stock A8 V1 board
1 card for 5x TL smoothers, 1x Mosfet and 1x Optocoupler
1 blank to import for your custom use

Printing/Assembly notes: This was designed around a .2 layer height, and a .4 wall extrusion width. The honeycomb sections are 1.6mm, so set your extrusion thickness accordingly. You will think its awfully light weight when you're assembling, but once assembled it's fairly rigid.The screws used for assembly are M3 counter sunk head. The holes are sized so that you just screw it together with no threading