Modular Toolbox - Modular Box - Tool Box

---ENG---hello everyone i would like to introduce you to this adjustable box with locking. after printing all the parts, we insert all the nuts into the prepared holes in the given parts. we screw the bottom of the box to the hinges and the top parts using m3x35mm screws 8pcs. after we have the base screwed together, we insert the inserts into the individual holes in the lid, which we connect with the locking hinges on one side and with the locking on the other side, for this we will need m3x8mm screws. inside the box, we insert the remaining hinges, which will also serve as a screw guide, and screw in m3x35mm screws 4pcs, there is no need to use anti-loose nuts here, the holes are smaller and therefore the screw will lock in place by itself. we put the hinge inserts on the inner inserts and connect them using m3x6mm 8pcs and 8pcs m3 nuts then we place the inserts on the inner hinges and screw in m3x35. and we are done. ---CZ---Ahoj všichniCHtěl bych vám představit tuto nastavitelnou k