Modular Wall-Mounted Coat Rack

🧱 Bill of Materials (BOM)To complete one coat rack unit, you’ll need:🖨 4x 3D printed parts (2 brackets, each made from 2 parts)🌳 1x beechwood rod – 30 × 30 mm, length 950 mm🔩 4x 4 × 20 mm screws – to fasten the wood rod to the brackets🔩 1x M4 × 60 mm screw + nut – for assembling the upper part of each bracket🔩 1x M4 × 30 mm screw + nut – for assembling the lower part of each bracket🔩 2x 4,5 × 70 mm screws + Ø6 mm wall plugs – for wall mountingAll parts are easy to source from your local hardware or DIY store. 🛠 Assembly InstructionsPrint the bracket parts • Material: PETG • Supports required • Infill: 15–30% recommended • Layer height: 0.2 mm Assemble the two brackets • Connect each pair of printed parts using: – 1x M4 × 60 mm screw + nut – 1x M4 × 30 mm screw + nut Prepare and attach the wooden rod • Cut the 30 × 30 mm wood rod to 950 mm (or any desired length) • Fix it to the brackets using 4x 4 × 20 mm screws Mount to the wall • Mark wall holes using bracket slots • Drill Ø6