monkey hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x267.19mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Default White Transmission Distance: 5 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to White At layer #15 (1.28mm) swap to Dark Brown At layer #22 (1.84mm) swap to Orange At layer #24 (2mm) swap to White for the rest.