Mop Fix Adapter / Адаптер для крепления швабры

The mop adapter was made to replace the broken one (after the first use). For the test sample, I used PLA material with 20% filling. After trying it out, it also broke down (which is not surprising because of the 20% occupancy rate). The final version, made of PETG with 100% filling, 4 nails inserted into the holes (for sure fastening), 20 mm long, and slightly adjusted settings due to shrinkage of the material, has been tested in operation and is held confidently :) The adapter is designed for a 22 mm rod, and a 20 mm thread.

I understand that it is not a very intricate and noteworthy thing, but it saved me from going to the store for another stalk with exactly the same nozzle, which would have broken in exactly the same way.

I post my craft in three versions: for PETG with fixed data (remember about shrinkage), in the form of .stl, and, if you need, an option for a remix, in the form of .f3d (Autodesk Fusion 360) and .3fm
_______________________________________________________