Mostly Printed HyperCube Evolution Xperimental 500³

First and foremost thank you JohanRC ,Lucifer Angel, PavelNS and PropsFactory or posting the original design.

I am trying to 3d Print the whole design, minus a few needed supports.
To cheep to buy the extrusions and bearings, so here goes my CAB (Cheep Ass Bastard) version.
;-)

I am using Lucifer Angel's 4040 extrusion and scaling it to 203 mm for the extrusions. I only have a max of 300 mm on my small delta and the 203 mm is what I calculated for the majority of the lengths needed.
https://www.thingiverse.com/thing:2916495

Edit: I have added the 4x205mm plate. Cura is saying it will take ~419g and 2d 04h 44min to print at 35 mm/s. Fun times! And yes I have the system on an APC 1000 for if the power goes out ;-P

I am using PavelNS's T slot nut for th 40x40. I have added a plate of 28 pieces. .2mm height with 100% infill.
https://www.thingiverse.com/thing:2822395

I am using the Motedis 90 deg. bracket and converted it from stp to stl with freecad. .2mm height with