Thingiverse
Mothsynth MIDI case
von DengisKong
1
Downloads
1
Likes
0
Makes
Small case for the MIDI Mothsynth.
There is an image that shows suggested supports for the top part.
Led diffusers are meant to be printed in a color that will transmit light.
Use a little glue, if you want, to hold the LED diffusers and to keep the halves secure. I use a tiny bit of glue on the diffusers and the clippy areas before pressing the halves together.
Check them out here https://mothsynth.com/
There is an image that shows suggested supports for the top part.
Led diffusers are meant to be printed in a color that will transmit light.
Use a little glue, if you want, to hold the LED diffusers and to keep the halves secure. I use a tiny bit of glue on the diffusers and the clippy areas before pressing the halves together.
Check them out here https://mothsynth.com/
DengisKong veröffentlicht auch auf
1 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
