Move Joystick Mod

This is the first Version of the Move mounted Joystick mod. You will need an old or cheap third party Dualshock 4 to desolder the left joystick and use it for the communication to the Playstation later on.

Still working on an easy way to mount the ds4 pcb with the accupack somewhere =/


What you need :

One Move_Joystick_A printed
One Move_Joystick_B printed
One Dualshock 4
One Move Controller
Three M3x6mm Screw
Eight Wires with 0,25mm^2 or less long enough to connect the joystick on the move to you ds4

Optional:
Plug in Connector for the Cable to unplug the Joystick if not needed

Tools:
Screwdriver for the DS4 (PH0) and the type of screws you are using
One soldering iron with at least 60 - 80 W
a little bit solder
double sided tape or velcro

Build Instructions:

!!!! Be careful at the disassembling of the Dualshock to not tear apart one of the connector cables of the Controller!!!!!

Disassemble the Dualshock 4. After you remove the four screws it will