MTB Crank Multi-tool - Version 2

Version 2 - Major change is design now using 1/4" socket (modified) and 1/4" socket / 1/4" hex adaptor for the wrench. This is a much stronger design and able to handle torques for most bolts on your MTB. Also changes to 7 in 1multi-tool - removed Allen keys and insert bit

Designed to fit into Shimano Hollowtech cranks. Additional parts required - hex bits, o-rings (optional), 1/4 socket (modified - see below), 1/4" hex to 1/4" socket adaptor (modified - see below), magnets, allen keys.

I used ABS+ filament

Tool consists of 5 printed parts:
1. Handle (shown in photo as RED part) - printed vertically to minimise supports
2. End Cap (shown in photo as BLACK part) - printed vertically to minimise supports
3. Top Cap (shown in photo as YELLOW part) - printed horizontally
4. Insert - Not used in version 2
5. Offside Cap (shown in photo as GREY part) - optional part used on the other end of the crank to seal for water and dirt ingress. Print without supports.