Thingiverse
Hobby
Zum Modell
Multi-control panel
469
Downloads
377
Likes
0
Makes
As I have most of the time limited space on my desk, I have created compact multi-control panel for flight simulator.
Currently it consists of following components:
- Parking brake
- Elevator trim wheel
- Elevator trim indicator
- Propeller RPM lever
- Spoilers lever
- Landing Gear lever
It is based on Arduino Pro Micro and [MobiFlight](https://www.mobiflight.com/) software, although you can also produce Arduino program yourself, or in case of X-plane, use something like [SimVim](https://simvim.com/).
**Hardware that you will need:**
- 5x *M3x10 screw*
- 6x *M3x16 screw*
- 1x *M3x20 screw*
- 1x *M3 nut*
- 11x *M3x10 countersunk screw*
- 2x *[0,6x8x25 spring](https://www.aliexpress.com/item/4000696709139.html?spm=a2g0o.cart.0.0.30b23c00JTqIfP&mp=1)*
- 2x *[0,5x4x10 spring](https://www.aliexpress.com/item/32886200404.html?spm=a2g0s.9042311.0.0.27424c4dkJJQLz)*
- 2x *[Limit switch](https://www.aliexpress.com/item/32953384447.html?spm=a2g0s.9042311.0.0.27424c4dQnb6xQ)*
Currently it consists of following components:
- Parking brake
- Elevator trim wheel
- Elevator trim indicator
- Propeller RPM lever
- Spoilers lever
- Landing Gear lever
It is based on Arduino Pro Micro and [MobiFlight](https://www.mobiflight.com/) software, although you can also produce Arduino program yourself, or in case of X-plane, use something like [SimVim](https://simvim.com/).
**Hardware that you will need:**
- 5x *M3x10 screw*
- 6x *M3x16 screw*
- 1x *M3x20 screw*
- 1x *M3 nut*
- 11x *M3x10 countersunk screw*
- 2x *[0,6x8x25 spring](https://www.aliexpress.com/item/4000696709139.html?spm=a2g0o.cart.0.0.30b23c00JTqIfP&mp=1)*
- 2x *[0,5x4x10 spring](https://www.aliexpress.com/item/32886200404.html?spm=a2g0s.9042311.0.0.27424c4dkJJQLz)*
- 2x *[Limit switch](https://www.aliexpress.com/item/32953384447.html?spm=a2g0s.9042311.0.0.27424c4dQnb6xQ)*
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
