Multi device charging station

I designed this charging station using this charging bloc : https://www.amazon.ca/dp/B0CGC76Y6Y?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1. Print the base and the cover and as many vertical separators as you need. The separators keep the base and the cover together. Printing is easy, no support required. I used PLA printed at .20 mm and it turned out very well. Update 2024/12/27 : Following a comment from Guserton, I have included a “Base Flat” STL. This will allow dimensionally different chargers to fit inside the base as long as they are not too thick.