Thingiverse
Multi Drawer Organizer (Stackable)
par TriDeeDesign
73
Téléchargements
151
Likes
2
Makes
This is Multi drawers component / Bolts organizer, useful to store small components and to organize screws and bolts storage.
To print and assembly you will need:
Print:
- 2 x Side Supports.
- 3 x Shelves.
- 1 x Top Lid.
- 9 x Drawers.
Assembly:
- you will need 16 Piese of M3 x 12 mm (M3x10 mm can fit as well).
The drawers inner dimensions are 48x98mm
they should slide easily if your printer is properly calibrated.
Update 03-2024: Stacking Side Support.stl
i uploaded additional side supports, so that you can stack multiple drawers on top of each other using this current design.
Just Note: its stacking on its own weight, there is no screws to connect when stacking.
To print and assembly you will need:
Print:
- 2 x Side Supports.
- 3 x Shelves.
- 1 x Top Lid.
- 9 x Drawers.
Assembly:
- you will need 16 Piese of M3 x 12 mm (M3x10 mm can fit as well).
The drawers inner dimensions are 48x98mm
they should slide easily if your printer is properly calibrated.
Update 03-2024: Stacking Side Support.stl
i uploaded additional side supports, so that you can stack multiple drawers on top of each other using this current design.
Just Note: its stacking on its own weight, there is no screws to connect when stacking.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
