Multiboard nUTray spool rack

A new spool rack system for the multiboard system.. I use standard broomstick handles bought in a hardware store. These are 24mm diameter. The holes are 27mm on the model. Just above the brackets I put a extra 8mm Offset Snap” for extra strength of the multiboard. I used PETG.Also for testing and iterations of the print model I used PLA-CF. Both seem strong. I had/have some issues with the angled loft from the 90degree to the 0degree bar not printing too well. It seemed as if the cooling was not getting to it. So for me, the underside is a bit rough… I used 2 x 13 mm Small Thread, Flat Head, Bolt to secure. Also good is 13 mm Small Thread, Flat Head, T-Bolt