Multifix AA Dial Indicator Holder

The holder is available in a version for radial and one for axial runout measurement.You can also use one for both directions if you add 2 heat set inserts for the height adjuster on the “bottom-site”. It just doesn't look that pretty on the underside and you need to switch the height adjuster to the correct site every time you switch from axial to radial and vice-versa. The height adjuster is available in one version for a heat set insert for the height adjuster screws and one with a 2.5mm hole for tapping. I partially tapped here and by that got enough friction on the screw so that no counter nut is needed to hold the screw in the right height position.Printing is up-side-down, all parts are in print orientation in the stl files.You need three or four M3 x H 5 x D 4.2 heat set inserts, three M3 x 18 and one M3 x 28 screws (complete length including head, shaft and thread).