MX-TECH LUCKY FORK CAP SOCKET

I didnt want to spend $68 on this tool to remove my fork cap. I printed from 98a TPU and its rigid enough and practically indestructible. Initially I made it for a 1.5" (38mm) socket then realized I should make it the same size as the axle nut because everyone with these forks is going to have a 32mm axle nut wrench. I printed a lot of walls, 24% infill and changed the infill to %100 several layers before the lugs so they attach well. Otherwise the lugs will only be attached to the top surface on the outside walls and inside walls will be sitting on infill. Should be fine from pla/pla plus.