Nano G1 Explorer Case - Meshtastic

Nano G1 Explorer Case

Carrying Loop
2x M3x10mm Nylon Button Head Screws to hold loop into place. Fill hole with glue and press into place.

Base
4x M3x25mm socket head cap screws
4x M3 Hex nuts
1x 6mm x 2mm magnet (or similar size)
2x M2x10mm socket head cap screws
2x M2 hex nuts
1x Slide switch
1x set of JST 1.25 connectors

Door
1x 12mm x 3mm magnet
1x M3x25mm socket head cap screw
1x M3 Hex nuts

Window
1x 1.5"x1.5"x1/8" acrylic square

1x plastic glue or epoxy

Replace M3 acorn nuts on Nano G1 Explorer with lower profile standard nylon hex nuts.



https://amazon.ca/gp/product/B083HVNSFV

https://amazon.ca/gp/product/B01NBVGPH5

https://amazon.ca/gp/product/B07BJFD6FL

https://amazon.ca/gp/product/B06Y4N8XWG

https://amazon.ca/gp/product/B01LXTPMFX

https://amazon.ca/gp/product/B07BTTWVDB

https://amazon.ca/gp/product/B076J5RGKS

https://amazon.ca/gp/product/B01MTS5ZWU

https://amazon.ca/dp/B07SLTMKH8