Napkin Ring

This is a napkin ring, typically used to hold napkins made of some type of fabric/cloth. The size should be appropriate for most napkin sizes, but if it is not, it is easy to scale the model directly in the slicer to the desired dimensions.Prints without support and without post processing (except removal of a tiny brim that you just pull off with your fingers in 1 second).In this print I used Bambulab PLA Silk Velvet-Eclipse Black-Red (13905).0.16mm layer height is better than higher or lower layer height for some reason. If you have quality issues with silk filament, make the outer wall and inner wall speed 30mm/s. The print speed will not be much longer but the quality will normally be improved significantly. See this video for a better view: