Naruto Fire Hueforge

Boost MeBoost Me (for free) If you appreciate my work! ThanksPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to RedAt layer #12 (1.04mm) swap to OrangeAt layer #16 (1.36mm) swap to Ivory White for the rest.