Naruto HueForge

DESCRIPTION Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 130x180.05mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu Skin Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Orange At layer #13 (1.12mm) swap to Skin At layer #20 (1.68mm) swap to White for the rest.