Naruto Hueforge

Project: Naruto2Colores.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x99.59mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5This print uses 6 unique filamentsSwap Instructions: Start with Yellow At layer #8 (0.72mm) swap to Mandarin Orange At layer #12 (1.04mm) swap to Black At layer #20 (1.68mm) swap to Jade White At layer #27 (2.24mm) swap to Black At layer #32 (2.64mm) swap to Marine Blue At layer #33 (2.72mm) swap to Jade White for the rest.