Neopixel RGB LED frame

Video painted top with frame: https://youtu.be/gsi5uamnZHs

This is made from scratch but inspired by TeachingTech design. This is still work in progress.

Mine incorporates 2×18650 cells in parallel to feed 47 WS2812B LEDs.

The size is 225×225mm, the LED area is 222×201mm, the logo area is 212×191mm.

On the rear there are 2 keyholes 162mm apart.

There is ample room for wire spaghetti inside.

I've used ESP-01 with WLED software.

BOM:
===============
* Soldering iron
* Common sense

* 80cm WS2812B led strip
* 134N3P Power bank module
* 2 × 18650 cells
* ESP-01
* 10×15 SPST switch KCD11
* AMS1117 small LDO breakout
* piece of paper as backing or print a thin sheet of plastic

Magnets

You can either use:
* 4 6×1mm mangets for the top part and 4 6×2mm magnets for the bottom part.

or
* use a screw in the base instead of magnets (M3x18mm max with 6x2mm head, DIN 7985 / ISO 7045, DIN 965 / ISO 7046, DIN 84 will work).


Wiring:
===============
The