Thingiverse
Nerf Glider
von Arctic3DPrints
364
Downloads
281
Likes
1
Makes
Fun little glider plane powered by Nerf.
Modeled to fit with a Nerf Jolt but should work with most single-shot front loaders. Tested on Jolt and Sidestrike with success. Simply load the blaster with a dart as normal, then slide the glider outside the dart in the barrel. After that just let it fly!
The main “tube” can be a little brittle depending on what the plane “lands” on, and how well the layer adhesion in the print is.
Modeled to fit with a Nerf Jolt but should work with most single-shot front loaders. Tested on Jolt and Sidestrike with success. Simply load the blaster with a dart as normal, then slide the glider outside the dart in the barrel. After that just let it fly!
The main “tube” can be a little brittle depending on what the plane “lands” on, and how well the layer adhesion in the print is.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
