Thingiverse
Netatmo Anemometer Bracket
von MG_Maker
3
Downloads
4
Likes
0
Makes
Netatmo Anemometer Bracket
Here's a bracket to mount the Netatmo Anemometer on a pole. The bracket is split in two, left and right and there is an STL file here for each one. Two pole sizes are provided 20m and 25mm.
The fixings needed are:
4 x 30mm M3 Stainless Steel Hex Cap bolts
6 x 20mm M3 Stainless Steel Hex Cap bolts
6 M3 Stainless Steel Nyloc Nuts
Here's a bracket to mount the Netatmo Anemometer on a pole. The bracket is split in two, left and right and there is an STL file here for each one. Two pole sizes are provided 20m and 25mm.
The fixings needed are:
4 x 30mm M3 Stainless Steel Hex Cap bolts
6 x 20mm M3 Stainless Steel Hex Cap bolts
6 M3 Stainless Steel Nyloc Nuts
MG_Maker veröffentlicht auch auf
4 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!