Slicer Discord
3DSEARCH / Electronics / Network switch vertical stand
Network switch vertical stand – 3D printable model from MakerWorld MakerWorld
Electronics

Network switch vertical stand

by Zer0s · Electronics
17 Downloads
3 Likes
6 Makes
Go to Model
Update 24 Oct 2025: Added a 36mm version, as I have purchased another switch. Update 6 May 2024: Added a 25mm version as another switch I bought is slimmer. This should work for TP Link metal case switches as well. ***** The 5 port and 8 port network switches I bought have different heights and depths, and I want to use a single design to fit most. I designed the vertical stand to hold a box around 28mm wide/thick and able to accommodate varying height and depth (90mm to 110mm is ideal, bigger range should be ok) Print in place, no supports required. Requires around 30 to 50g of filament, depending on your infill settings. *****Want to buy me a coffee?https://www.buymeacoffee.com/zer0s Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you) AliExpress affiliate links:XikeStor 6-Port 2.5G Simple L2 Switch Web Managedhttps://s.click.aliexpress.com/e/_DkWkO8r AMPCOM 2.5GbE Managed Switch 8 Porthttps://s.click.aliexpress.com/e
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
print-in-place design
Print-in-place
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA, Polycarbonate
Min. bed size
50 mm (Small)
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Zer0s also publishes on

111 additional models across 2 more platforms

Thingiverse
56 models
♥ 824 ↓ 840 ⚒ 2
Printables
55 models
♥ 627 ↓ 4,339 ⚒ 38
Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for Network switch vertical stand?
Any FDM printer should handle Network switch vertical stand just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does Network switch vertical stand need supports when printing?
Nope — Network switch vertical stand is print-in-place, so it comes off the bed ready to use. No supports, no assembly.
What file format is Network switch vertical stand available in?
Network switch vertical stand is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Network switch vertical stand free to download?
Yes, Network switch vertical stand is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Network switch vertical stand
Network switch vertical stand
by Zer0s
↓ 42 ♥ 2
Network switch vertical stand
Network switch vertical stand
by Zer0s
↓ 2 ♥ 2
Netgear Network Switch Vertical Stand
Netgear Network Switch Vertical Stand
by mukul
↓ 103 ♥ 13
Netgear Network Switch Vertical Stand
Netgear Network Switch Vertical Stand
by mukul_k
↓ 56 ♥ 7
TP-Link Network Switch Vertical IKEA BEKANT Desk Mount
TP-Link Network Switch Vertical IKEA BEKANT Desk Mount
by JbbDE
↓ 5 ♥ 5
TP-Link Network Switch Vertical IKEA BEKANT Desk Mount
TP-Link Network Switch Vertical IKEA BEKANT Desk Mount
by JbbDE
↓ 5 ♥ 5
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection