Network switch vertical stand

Update 24 Oct 2025: Added a 36mm version, as I have purchased another switch. Update 6 May 2024: Added a 25mm version as another switch I bought is slimmer. This should work for TP Link metal case switches as well. ***** The 5 port and 8 port network switches I bought have different heights and depths, and I want to use a single design to fit most. I designed the vertical stand to hold a box around 28mm wide/thick and able to accommodate varying height and depth (90mm to 110mm is ideal, bigger range should be ok) Print in place, no supports required. Requires around 30 to 50g of filament, depending on your infill settings. *****Want to buy me a coffee?https://www.buymeacoffee.com/zer0s Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you) AliExpress affiliate links:XikeStor 6-Port 2.5G Simple L2 Switch Web Managedhttps://s.click.aliexpress.com/e/_DkWkO8r AMPCOM 2.5GbE Managed Switch 8 Porthttps://s.click.aliexpress.com/e