Ninja Bookmark

Simple 2mm thick large format bookmark. Project: Ninja-BM.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 76.31x245mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 1.9mm and the Actual Depth is 1.9mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Gold At layer #16 (1.36mm) swap to Silver At layer #20 (1.68mm) swap to Jade White for the rest.