Nintendo Switch 2 compact dock

A compact dock for the Nintendo Switch 2 that you can actually fit in your pocket. Disclaimer: You are fully accountable for any damage that may occur while building this. This project requires disassembling the original Nintendo Switch 2 dock.Required Parts from Original DockComponents to Acquire:MotherboardUSB-C connector (with ribbon cableTop cover of the motherboard (the one with the thermal pads)Status LEDScrews to Acquire:6x black screws holding down the motherboard2x black screws holding the USB-C connector1x silver screw holding the status LEDAssembly GuideGut the Switch 2 dock. Remove all components and screws listed above. Install the status LED. Screw it in with the ribbon cable pointing to the corner of the dock. It is recommended to first remove the LED from the motherboard and reattach it after it is secured in the new dock.Insert the motherboard. Use the 3 alignment pins for correct placement.Secure the motherboard. Use 2 screws. Ensure no screw holes that pass through t