Normandy SR-2 Base

You will need two 10x2 mm magnets.
One is glued into the model, the second into the stand. I glued the magnet into the model, and then covered it with putty so that it would not be visible.
Important! - the magnet must be glued into the stand so that it sticks out a little - literally by 0.2 mm. If you glue it flush, then the model will not hold well!
Attention! - Check and position the magnets correctly before gluing the second magnet into the stand. It is important that magnets attract!

The same files can be downloaded from here - https://t.me/gmbka/222

You can use any magnet, the main thing is that the dimensions match - 10x2 mm. For example:
https://aliexpress.ru/item/1005001614101853.html?sku_id=12000029604740588&spm=a2g2w.productlist.search_results.3.7666374cRx8I6f

Понадобятся два магнита размером 10х2 мм. Один вклеиваем в модель, второй - в подставку. Я вклеил магнит в модель под шпаклёвку, чтобы его не было видно.
Важный момент, магнит нужно вклеить в подставку