Thingiverse
nRF52840DK nRF52833DK stackable mount
door schuschu
0
Downloads
2
Likes
0
Makes
Stackable nRF52840DK and nRF52833DK plate. Keeps clutter off your desk when working with Nordic Semiconductor nRF52840/33 development kits (and for the most part nRF5340DK - experimental 53 enabled versions with both usb cutouts and the increased P24 cutout added).
Designed for 6x2.5mm self-tapping screws https://www.aliexpress.com/item/1005003934120055.html and M3 spacers (1cm and longer).
On the 6mm screw version, the battery slightly (~1.2.mm) exceeds the bottom plate, if mounting them directly to a surface the 8mm is recommended.
Printed on an Ender-3 S1 Pro with eSun black PLA with no supports needed.
Mounting hole locations based on the nRF52840DK 3D model from SnapEDA (https://www.snapeda.com/parts/NRF52840-DK/Nordic%20Semiconductor%20ASA/view-part/.)
Designed for 6x2.5mm self-tapping screws https://www.aliexpress.com/item/1005003934120055.html and M3 spacers (1cm and longer).
On the 6mm screw version, the battery slightly (~1.2.mm) exceeds the bottom plate, if mounting them directly to a surface the 8mm is recommended.
Printed on an Ender-3 S1 Pro with eSun black PLA with no supports needed.
Mounting hole locations based on the nRF52840DK 3D model from SnapEDA (https://www.snapeda.com/parts/NRF52840-DK/Nordic%20Semiconductor%20ASA/view-part/.)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!