Odroid X2 - 3D Case - hardkernel.com

3D case for the Odroid-X2 board.
=


Including:
1x Base_box.STL & Base_box.SLDPRT
1x Base_Top.STL & Base_Top.SLDPRT
1x Odroid-X2.SLDPRT
1xOdroid-x2-inBox.SLDASM


Instructions:
Please Use the .STL files to print for your 3D printer.

Please print one by one, and change the orientation of the file, to suit your 3D printer (Recommend: Largest flat area as base)

Once printed, you will need 8x M3 screws(both self tapper & Blots style will work). These are used to hold both the Odroid-x2 in Place, and the Top_box part on.


Reason:
This came about after looking on Thingiverse for something like this, and found there wasn't much variation, and that the only one on Thingiverse (spring 2014) was slightly limited.


Copyright:
I am publish this and an Open-hardware design, hence why we have releasing our Soildworks 2012 3D mock up parts. [Designed by APE Systems]

Please feel free to uses and redesign at your leisure.

Please also link back to this post when ev