Oni Hueforge

Thanks for checking out my hueforge! Please leave a like and share! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 240x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA 3DHojor Black Transmission Distance: 0.3 PLA 3DHojor Fire Engine Red Transmission Distance: 4 PLA JG Maker Yellow Transmission Distance: 8 PLA 3DHojor White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #20 (1.68mm) swap to White for the rest.