Open-CNC-Shield Wireless Panel Case

This is a case that i designed for the Open-CNC-Shield Wireless Panel that comes from Timo Altholtmann.
https://blog.altholtmann.com/

The back of the case is about 55mm and the front is about 35mm high.
The height is needed because the buttons are going far inside the case.

If more height is needed i designed some spacers in 5, 10, 15 and 20mm.
As gadget you can print them in a different color and individualize your case with this spacers.

Show me your favourite colours :)

On the side there is a hole for mounting a micro usb adapter that is connected to the power bank which is the power supply for the wireless control.
The power bank is also mentioned at Timo Altholtmanns web site because it can power the wireless panel and also can be loaded at the same time.

For the display there are 4 pins that match the screw holes. I heated the pins after mounting the display and fixed it with them. If the pins break or you have to replace the display then hot glue will also do