Thingiverse
OpenAstroTracker Driver Box
por CHARL13
18
Descargas
10
Likes
0
Makes
I found a lot of the existing options for the drivers didn't work for me so I've created my own.
It has holes so that you can either mount it to the 2020 extrusion using M4 screws and T nuts, or attach it to the RA wheel using the bracket.
You may need to scale the XY dimensions for the lid to get a snug fit depending on how accurate your printer is. I scaled mine to 100.5% which holds really nicely.
As screws are in close proximity to the driver board I'd recommend a bit of insulating tape over the top of the screw heads just to prevent any shorts.
It has holes so that you can either mount it to the 2020 extrusion using M4 screws and T nuts, or attach it to the RA wheel using the bracket.
You may need to scale the XY dimensions for the lid to get a snug fit depending on how accurate your printer is. I scaled mine to 100.5% which holds really nicely.
As screws are in close proximity to the driver board I'd recommend a bit of insulating tape over the top of the screw heads just to prevent any shorts.
CHARL13 también publica en
28 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
