Thingiverse
OpenFlexure Microscope V2
par LIBRE-hub
456
Téléchargements
331
Likes
0
Makes
THIS IS NOT MY OWN DESIGN! I am sharing the files from Richard Bowman documented in the public domain in detail here on DocuBricks: http://docubricks.com/viewer.jsp?id=9134926926759813120#brick_909106319 here on github: https://github.com/rwb27/openflexure_microscope, here published: http://dx.doi.org/10.1063/1.4941068, and here on Waterscope: http://www.waterscope.org/.
Optomechanics is a crucial part of any microscope; when working at high magnification, it is absolutely crucial to keep the sample steady and to be able to bring it into focus precisely. Accurate motion control is extremely difficult using printed mechanical parts, as good linear motion typically equires tight tolerances and a smooth surface finish. This design for a 3D printed microscope stage uses plastic flexures, meaning its motion is free from friction and vibration. It achieves steps well below 100nm when driven with miniature stepper motors, and is stable to within a few microns over several days. This design a
Optomechanics is a crucial part of any microscope; when working at high magnification, it is absolutely crucial to keep the sample steady and to be able to bring it into focus precisely. Accurate motion control is extremely difficult using printed mechanical parts, as good linear motion typically equires tight tolerances and a smooth surface finish. This design for a 3D printed microscope stage uses plastic flexures, meaning its motion is free from friction and vibration. It achieves steps well below 100nm when driven with miniature stepper motors, and is stable to within a few microns over several days. This design a
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
